loading
Laser-Grade Bamboo Plywood – Precision-Cut for CNC & Laser Engraving
⚡ Laser cutting & engraving machines (Glowforge, xTool, Epilog, etc.)
⚡ CNC router projects
⚡ Detailed craftwork (signs, jewelry, puzzles, decor)
✔ Low-Resin Formula – Minimizes burn marks and smoke for cleaner cuts.
✔ Uniform Density – Consistent engraving depth with no voids or splintering.
✔ Smooth Finish – Pre-sanded (180+ grit) for immediate laser-ready use.
✔ Eco-Friendly – FSC-certified bamboo, no toxic adhesives.
Thickness: 1/8" (3mm) | 1/4" (6mm) – Most popular for lasers
Size:2500x1250x3mm, 2500x1250x6.35mm
Core Type: Vertical layup for reduced warping
Tolerance: ±0.2mm thickness variation
Crisp Details – Tight grain structure holds fine lines and small text.
Minimal Charring – Less resin = reduced cleanup (vs. MDF or cheap ply).
Aesthetic Results – Natural honey-toned engraving contrasts beautifully.
▸ CO2 lasers (40W-100W recommended)
▸ Diode lasers (adjust power/speed settings)
▸ Compatible with LightBurn, RDWorks
Test Settings First – Start at 20% power/10mm speed, then adjust.
Masking Recommended – Apply transfer tape to prevent surface scorching.
Ventilation – Bamboo burns cleaner than MDF but still requires airflow.
Protective Film – Optional peel-off layer to prevent scratches.
Bulk Discounts – Available for makerspaces or small businesses.
Laser-Grade Bamboo Plywood – Precision-Cut for CNC & Laser Engraving
⚡ Laser cutting & engraving machines (Glowforge, xTool, Epilog, etc.)
⚡ CNC router projects
⚡ Detailed craftwork (signs, jewelry, puzzles, decor)
✔ Low-Resin Formula – Minimizes burn marks and smoke for cleaner cuts.
✔ Uniform Density – Consistent engraving depth with no voids or splintering.
✔ Smooth Finish – Pre-sanded (180+ grit) for immediate laser-ready use.
✔ Eco-Friendly – FSC-certified bamboo, no toxic adhesives.
Thickness: 1/8" (3mm) | 1/4" (6mm) – Most popular for lasers
Size:2500x1250x3mm, 2500x1250x6.35mm
Core Type: Vertical layup for reduced warping
Tolerance: ±0.2mm thickness variation
Crisp Details – Tight grain structure holds fine lines and small text.
Minimal Charring – Less resin = reduced cleanup (vs. MDF or cheap ply).
Aesthetic Results – Natural honey-toned engraving contrasts beautifully.
▸ CO2 lasers (40W-100W recommended)
▸ Diode lasers (adjust power/speed settings)
▸ Compatible with LightBurn, RDWorks
Test Settings First – Start at 20% power/10mm speed, then adjust.
Masking Recommended – Apply transfer tape to prevent surface scorching.
Ventilation – Bamboo burns cleaner than MDF but still requires airflow.
Protective Film – Optional peel-off layer to prevent scratches.
Bulk Discounts – Available for makerspaces or small businesses.